Sorry for my late reply,I was preparing literatures for you.Pls check the attachment
1,We are a solids control system manufacturer,our equipments needs a lot of iron,and steel.And our company is located in China iron production City-Tangshan.Not only do we enjoy low price high quality iron material,but also we have build good relations with many steel manufacturers.
2,But,be honestly,some of our partners specilizing in manufacture,they usually do export through trade company.As an exporter of machine Equipments,we sometimes help our parters do export. Drilling fluids processing system
3,If we get order from you,we will select the best manufacturer for you,and use our experience in international trade to make our deal go smoothly.
I enclosed one of our potential partners literature for your info.,Pls check and give your comments. Drilling fluids processing system
For any further info,pls be free to contact us.
Awaiting your reply.
Searh in google to find GN solids control easily
Aug 27, 2009
Aug 24, 2009
Oilfield Hydraulic-rotary drilling Equipments
Company Website: Solids control system.Oil well drilling utilises tri-cone roller, carbide embedded, fixed-cutter diamond, or diamond-impregnated drill bits to wear away at the cutting face. This is preferred because there is no need to return intact samples to surface for assay as the objective is to reach a formation containing oil or natural gas. Sizable machinery is used, enabling depths of several kilometres to be penetrated. Rotating hollow drill pipes carry down bentonite and barite infused drilling muds to lubricate, cool, and clean the drilling bit, control downhole pressures, stabilize the wall of the borehole and remove drill cuttings. The mud travels back to the surface around the outside of the drill pipe, called the annulus. Examining rock chips extracted from the mud is known as mud logging. Another form of well logging is electronic and is frequently employed to evaluate the existence of possible oil and gas deposits in the borehole. This can take place while the well is being drilled, using Measurement While Drilling tools, or after drilling, by lowering measurement tools into the newly-drilled hole.
Blog :Oilfield Equipments
Oilfield Hydraulic-rotary drilling
The rotary system of drilling was in general use in Texas in the early 1900s. It is a modification of one invented by Fauvelle in 1845, and used in the early years of the oil industry in some of the oil-producing countries in Europe. Originally pressurized water was used instead of mud, and was almost useless in hard rock before the diamond cutting bit.[1]. The main breakthrough for rotary drilling came in 1901, when Anthony Francis Lucas combined the use of a steam-driven rig and of mud instead of water in the Spindletop discovery well.Press Release room: Press releases GN Solids Control
The drilling and production of oil and gas can pose a safety risk and a hazard to the environment from the ignition of the entrained gas causing dangerous fires and also from the risk of oil leakage polluting water, land and groundwater. For these reasons, redundant safety systems and highly trained personnel are required by law in all countries with significant production.
Solids Control Business Profile
Blog :Oilfield Equipments
Oilfield Hydraulic-rotary drilling
The rotary system of drilling was in general use in Texas in the early 1900s. It is a modification of one invented by Fauvelle in 1845, and used in the early years of the oil industry in some of the oil-producing countries in Europe. Originally pressurized water was used instead of mud, and was almost useless in hard rock before the diamond cutting bit.[1]. The main breakthrough for rotary drilling came in 1901, when Anthony Francis Lucas combined the use of a steam-driven rig and of mud instead of water in the Spindletop discovery well.Press Release room: Press releases GN Solids Control
The drilling and production of oil and gas can pose a safety risk and a hazard to the environment from the ignition of the entrained gas causing dangerous fires and also from the risk of oil leakage polluting water, land and groundwater. For these reasons, redundant safety systems and highly trained personnel are required by law in all countries with significant production.
Solids Control Business Profile
Aug 22, 2009
supply Reverse circulation (RC) drilling solids control
Reverse circulation (RC) drilling solids controlWe supply Reverse circulation (RC) drilling solids control equipments. Reverse Circulation (RC) rig, outside Newman, Western Australia Track mounted Reverse Circulation rig (side view).RC drilling is similar to air core drilling, in that the drill cuttings are returned to surface inside the rods. The drilling mechanism is a pneumatic reciprocating piston known as a hammer desilterட்ரிவிங் a tungsten-steel drill bit. RC drilling utilises much larger rigs and machinery and depths of up to 500 metres are routinely achieved. RC drilling ideally produces dry rock chips, as large air compressors dry the rock out ahead of the advancing drill bit. RC drilling is slower and costlier but achieves better penetration than RAB or air core drilling; it is cheaper than diamond coring and is thus preferred for most mineral exploration work.Drilling fluids processing system
Reverse circulation is achieved by blowing air down the rods, the differential pressure creating air lift of the water and cuttings up the inner tube which is inside each rod. It reaches the bell at the top of the hole, then moves through a sample hose which is attached to the top of the cyclone. The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag.Gas liquid separator
The most commonly used RC drill bits are 5-8 inches (12.7–20.32 cm) in diameter and have round metal 'buttons' that protrude from the bit, which are required to drill through shale and abrasive rock. As the buttons wear down, drilling becomes slower and the rod string can drilling mud cleanerpotentially become bogged in the hole. This is a problem as trying to recover the rods may take hours and in some cases weeks. The rods and drill bits themselves are very expensive, often resulting in great cost to drilling companies when equipment is lost down the bore hole. Most companies will regularly 'sharpen' the buttons on their drill bits in order to prevent this, and to speed up progress. Usually, when something is lost (breaks off) in the hole, it is not the drill string, but rather from the bit, hammer, or stabiliser to the bottom of the drill string (bit). This is usually caused by a blunt bit getting stuck in fresh rock, over-stressed metal, or a fresh drill bit getting stuck in a part of the hole that is too small, owing to having used a bit that has worn to smaller than the desired hole diameter.mud tank
Although RC drilling is air-powered, water is also used, to reduce dust, keep the drill bit cool, and assist in pushing cutting back upwards, but also when collaring a new hole. A mud called liqui-pol is mixed with water and pumped into the rod string, down the hole. This helps to bring up the sample to the surface by making the sand stick together. Occasionally, 'super-foam' (AKA 'quik-foam') is also used, to bring all the very fine cuttings to the surface, and to clean the hole. When the drill reaches hard rock, a collar is put down the hole around the rods which is normally PVC piping. Occasionally the collar may be made from metal casing. Collaring a hole is needed to stop the walls from caving in and bogging the rod string at the top of the hole. Collars may be up to 60 metres deep, depending on the ground, although if drilling through hard rock a collar may not be necessary.
Reverse circulation rig setups usually consist of a support vehicle, an auxiliary vehicle, as well as the rig itself. The support vehicle, normally a truck,
Reverse circulation is achieved by blowing air down the rods, the differential pressure creating air lift of the water and cuttings up the inner tube which is inside each rod. It reaches the bell at the top of the hole, then moves through a sample hose which is attached to the top of the cyclone. The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag.Gas liquid separator
The most commonly used RC drill bits are 5-8 inches (12.7–20.32 cm) in diameter and have round metal 'buttons' that protrude from the bit, which are required to drill through shale and abrasive rock. As the buttons wear down, drilling becomes slower and the rod string can drilling mud cleanerpotentially become bogged in the hole. This is a problem as trying to recover the rods may take hours and in some cases weeks. The rods and drill bits themselves are very expensive, often resulting in great cost to drilling companies when equipment is lost down the bore hole. Most companies will regularly 'sharpen' the buttons on their drill bits in order to prevent this, and to speed up progress. Usually, when something is lost (breaks off) in the hole, it is not the drill string, but rather from the bit, hammer, or stabiliser to the bottom of the drill string (bit). This is usually caused by a blunt bit getting stuck in fresh rock, over-stressed metal, or a fresh drill bit getting stuck in a part of the hole that is too small, owing to having used a bit that has worn to smaller than the desired hole diameter.mud tank
Although RC drilling is air-powered, water is also used, to reduce dust, keep the drill bit cool, and assist in pushing cutting back upwards, but also when collaring a new hole. A mud called liqui-pol is mixed with water and pumped into the rod string, down the hole. This helps to bring up the sample to the surface by making the sand stick together. Occasionally, 'super-foam' (AKA 'quik-foam') is also used, to bring all the very fine cuttings to the surface, and to clean the hole. When the drill reaches hard rock, a collar is put down the hole around the rods which is normally PVC piping. Occasionally the collar may be made from metal casing. Collaring a hole is needed to stop the walls from caving in and bogging the rod string at the top of the hole. Collars may be up to 60 metres deep, depending on the ground, although if drilling through hard rock a collar may not be necessary.
Reverse circulation rig setups usually consist of a support vehicle, an auxiliary vehicle, as well as the rig itself. The support vehicle, normally a truck,
Aug 19, 2009
Auger drilling mud equipments
We manufacture mud cleaning equipments for Auger drilling
Solids control equipments
Auger drilling is done with a helical screw which is driven into the ground with rotation; the earth is lifted up the borehole by the blade of the screw.
decanter centrifuge
Hollow stem Auger drilling is used for environmental drilling, geotechnical drilling, soil engineering and geochemistry reconnaissance work in exploration
for mineral deposits. Solid flight augers/bucket augers are used in construction drilling. In some cases, mine shafts are dug with auger drills. Small augers Gas liquid separator
can be mounted on the back of a utility truck, with large augers used for sinking piles for bridge foundations. Mud gun
Auger drilling is restricted to generally soft unconsolidated material or weak weathered rock. It is cheap and fast.
Related auger drilling mud equipments including:
Solids control equipments
Auger drilling is done with a helical screw which is driven into the ground with rotation; the earth is lifted up the borehole by the blade of the screw.
decanter centrifuge
Hollow stem Auger drilling is used for environmental drilling, geotechnical drilling, soil engineering and geochemistry reconnaissance work in exploration
for mineral deposits. Solid flight augers/bucket augers are used in construction drilling. In some cases, mine shafts are dug with auger drills. Small augers Gas liquid separator
can be mounted on the back of a utility truck, with large augers used for sinking piles for bridge foundations. Mud gun
Auger drilling is restricted to generally soft unconsolidated material or weak weathered rock. It is cheap and fast.
Related auger drilling mud equipments including:
Aug 15, 2009
China Shearing pump manufacturer
GN Shearing pump are manufactured in China factory,but offer to worldwide customers.
Welcome to see details of : shear pump. Decanting centrifuge
Shearing Pump is mainly used to make up the chemicals of oilfield. In consideration of the poor working conditions, desilter the company has very special requirements for choosing the key parts in order to extend its life.
The impellers and shearing Drilling mud purification system plates are made from fine quality stainless steel; the unique mechanical sealing and imported oil seal assure shearing pump of long service life, Gas liquid separator high efficiency, no-leaking, reliability and convenience of maintenance.
It can satisfy customers’ requirements in making up and dealing with the high-performance mud.
Shear pump is named by it’s fuction,actually,it is also a centrifugal pump.
Welcome to see details of : shear pump. Decanting centrifuge
Shearing Pump is mainly used to make up the chemicals of oilfield. In consideration of the poor working conditions, desilter the company has very special requirements for choosing the key parts in order to extend its life.
The impellers and shearing Drilling mud purification system plates are made from fine quality stainless steel; the unique mechanical sealing and imported oil seal assure shearing pump of long service life, Gas liquid separator high efficiency, no-leaking, reliability and convenience of maintenance.
It can satisfy customers’ requirements in making up and dealing with the high-performance mud.
Shear pump is named by it’s fuction,actually,it is also a centrifugal pump.
Aug 11, 2009
Drilling mud agitator equipment supplier
Mud Agitator is an important equipment for Drilling mud purification system.To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably. It is furnished with an up-to-date gear reducer featured by high driving efficiency, compact structure, low noise level, reliable quality and easy maintenance. Therefore, it is a reliable product of agitating the mud.
Solids Control Closed Loop Systems
Mud agitator Product Features:1. Smooth driving and low noise level.2. Good radiation and low temperature rise.3. Good sealing with no leakage.4. Large driving power and powerful agitation.5. Reliable quality——three years’ maintenance-free guarantee.Series Mud AgitatorsAs part of the solid control system, the agitator is used to agitate the mud to make cuttings, silt and sand along with the mud pass easily the solids control system without being precipitated onto the tank bottom. The main function of the agitator is to mix the cuttings and other solids with the mud. The gear reducer uses Archimedes cylindrical worm drive, the worm is on the left side. The connection between the motor and the gear reducer as well as the reducer output shaft and the agitating shaft is made by using coupling.
other related products:
Linear Motion Shale Shaker
Buy drilling mud agitator from China supplier
Solids Control Closed Loop Systems
Mud agitator Product Features:1. Smooth driving and low noise level.2. Good radiation and low temperature rise.3. Good sealing with no leakage.4. Large driving power and powerful agitation.5. Reliable quality——three years’ maintenance-free guarantee.Series Mud AgitatorsAs part of the solid control system, the agitator is used to agitate the mud to make cuttings, silt and sand along with the mud pass easily the solids control system without being precipitated onto the tank bottom. The main function of the agitator is to mix the cuttings and other solids with the mud. The gear reducer uses Archimedes cylindrical worm drive, the worm is on the left side. The connection between the motor and the gear reducer as well as the reducer output shaft and the agitating shaft is made by using coupling.
other related products:
Linear Motion Shale Shaker
Buy drilling mud agitator from China supplier
Aug 10, 2009
Supply Sand pump From China
GN solids control is a China sand pump manufacturer.
Sand Pump is mainly used to provide the drilling fluid of certain discharge capacity and pressure to the desander, desilter and mud pump. After more than ten years’ application and improvement, the centrifugal sand pump of our company has reached the national advanced level and international level of this kind in both technical properties and sealing life.
Vacuum Degasser
Gas Liqiud Separator
Main Technical Parameters:
Discharge Capacity 200-260㎡/h
Delivery Head 28-35mm
Rotate Speed 1450rmp,1780rmp(60Hz)
Motor Power 37kw,45kw,55kw,75kw
Working Efficiency 0.65
Dimension of Inlet and Outlet DN200×150mm
Weight 1115kg
Sand Pump
Jet Mud Mixer
Mud Agitator
China sand pump manufacturer,your best supplier.
Sand Pump is mainly used to provide the drilling fluid of certain discharge capacity and pressure to the desander, desilter and mud pump. After more than ten years’ application and improvement, the centrifugal sand pump of our company has reached the national advanced level and international level of this kind in both technical properties and sealing life.
Vacuum Degasser
Gas Liqiud Separator
Main Technical Parameters:
Discharge Capacity 200-260㎡/h
Delivery Head 28-35mm
Rotate Speed 1450rmp,1780rmp(60Hz)
Motor Power 37kw,45kw,55kw,75kw
Working Efficiency 0.65
Dimension of Inlet and Outlet DN200×150mm
Weight 1115kg
Sand Pump
Jet Mud Mixer
Mud Agitator
China sand pump manufacturer,your best supplier.
Aug 8, 2009
China manufacturer Decanter Centrifuge
We are China manufacturer of both high-speed,low speed,and medium-speed decanter centrifuge. Buy Decanting centrifuge
As a mud purifying equipment, the Decanter centrifuge can effectively remove the harmful solid particles from the drill fluid, improve the mud performance, ensure the drilling safety, lessen the pollution of oil/gas reservoir and reduce the mechanical abrasion of drilling equipment.1650-2200rpm centrifuge can separate 2-7μm solid particles.
Product Features:
LW450 Series medium-high speed decanter centrifuges that are fitted with a conical barrel and run in the screw propelling pattern have the following features:
1.The propeller can rotate fluently in screw pattern, so that the high solids particles removing efficiency is achieved.
Treatment for drilling fluids solids
2.The high dynamic balance precision enables the decanter centrifuge to run smoothly.
3.The patent product—differential features reasonable structure and long service life.
4.Class D bearings made by Sweden SKF Company are used as main bearings. They have high running precision and long service life.
5.The underflow and the overflow can be regulated easily.
6.Key parts made of high quality stainless steel and tungsten carbide have the high corrosion resistance.
7.The explosion-proof motor and electric control system are used.
Buy decanting centrifuge from GN solids control Equipment
2.The high dynamic balance precision enables the decanter centrifuge to run smoothly.
3.The patent product—differential features reasonable structure and long service life.
4.Class D bearings made by Sweden SKF Company are used as main bearings. They have high running precision and long service life.
5.The underflow and the overflow can be regulated easily.
6.Key parts made of high quality stainless steel and tungsten carbide have the high corrosion resistance.
7.The explosion-proof motor and electric control system are used.
Buy decanting centrifuge from GN solids control Equipment
Aug 6, 2009
Balanced Elliptical Shale Shaker
Balanced Elliptical Shale Shaker China manufacturer
Buy Shale Shaker now
Having absorbed the latest achievements in screening machines at home and abroad and integrated the strong points of circle and rectilinear vibrosieves, GN Shale Shaker linear motion shale shaker ZS280D-3P Balanced Elliptical Shale Shaker adopts balanced elliptical vibrating structure to greatly raise the speed of carrying drill cuttings and boost through screen quantity of drilling fluid, thus avoiding pasting on the screen.
The shale shaker takes horizontally-placed double explosion-proof vibrating source, and uses self synchronization effect to form balanced elliptical movement, which is quite different from the current elliptical sieve and home and abroad. Solids control equipment
It is of creativity in technique and has been in a leading position in China. It is especially applicable in the working conditions with stratigraphic fluctuation. Its advantages become more apparent as drilling fluid is of much higher viscosity.
Balanced Elliptical Shale Shaker Main Technical Parameters
Motor Power
2×2.2kw
Mode of Vibration
Elliptical
Disposal Capacity
30—60l/s
Vibration Frequency
24.3Hz
Area of Screen
3×0.833×1.15㎡
Amplitude(two-side)
5.8mm(long axis)、5.8mm(long axis)
Throwing Index
6—7.2
Adjustment of Inclination of Sieve Surface
0°--5.5°
Balanced Elliptical Shale Shaker China manufacturer
Buy Shale Shaker now
Aug 5, 2009
Drilling fluids processing system
Drilling fluids processing system manufacturer
GN solids control is a China Drilling fluids processing system Manufacturer.
Buy Now:Drilling fluids Processing System
In geotechnical engineering, drilling fluid processing system is a fluid system used to drill boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. The three main categories of drilling fluids are water based muds (which can be dispersed and non dispersed), non aqueous muds, usually called oil based mud, and gaseous drilling fluid, in which a wide range of gases can be used.
Catalogs:
Products Catalog
User Manuals:
GNS Shale Shaker
CSNQ 250-100 Mud-Cleaner
CSQ 250×2 Desander
CNQ100×10 Desilter
The main functions of drilling fluids processing system include providing hydrostatic pressure to prevent formation fluids from entering into the well bore, keeping the drill bit cool and clean during drilling, carrying out drill cuttings and suspending the drill cuttings while drilling is paused and the drilling assembly is brought in and out of the hole. The drilling fluid used for a particular job is selected to avoid formation damage and to limit corrosion.
GN solids control is A China drilling fluids processing system supplier.
GN solids control is a China Drilling fluids processing system Manufacturer.
Buy Now:Drilling fluids Processing System
In geotechnical engineering, drilling fluid processing system is a fluid system used to drill boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. The three main categories of drilling fluids are water based muds (which can be dispersed and non dispersed), non aqueous muds, usually called oil based mud, and gaseous drilling fluid, in which a wide range of gases can be used.
Catalogs:
Products Catalog
User Manuals:
GNS Shale Shaker
CSNQ 250-100 Mud-Cleaner
CSQ 250×2 Desander
CNQ100×10 Desilter
The main functions of drilling fluids processing system include providing hydrostatic pressure to prevent formation fluids from entering into the well bore, keeping the drill bit cool and clean during drilling, carrying out drill cuttings and suspending the drill cuttings while drilling is paused and the drilling assembly is brought in and out of the hole. The drilling fluid used for a particular job is selected to avoid formation damage and to limit corrosion.
GN solids control is A China drilling fluids processing system supplier.
Subscribe to:
Posts (Atom)
